Constructed a tool table to mount my power tools. Based on Tony Bingelis and EAA table designs. Took about 2.5 hours and will preserve workshop space.

Took advantage of the 10ft ceilings in the workshop by adding 360 cubic feet of storage around the perimeter. Cost was less than $.90/cf which is quite reasonable in my book!

Decided to relocate the flourescent light fixtures in the garage to provide even lighting throughout the work area.Refer to the worktable pic below to see results.... Thanks to my good friends Bob and Sue G. for the advice and help they provided in this activity!

Refinished shop floor today. Moved all contents out of the work area and repainted floor. While I would have loved to put down an epoxy finish, the time required to remove the old paint and prep the floor was too great and I was unwilling to take an approximate two week hit to the build schedule.

Spent a rewarding 3.5 hours tonight building a worktable. Modified the standard EAA worktable slightly by adding adjustable locking casters and increasing the usable height of the lower storage surface. Many Thanks to Bob Godin for his help!