Bearhawk #908
Our goal is to get an airplane that will seat four plus baggage, fly 165 mph and accept amphibious floats at a later date.

The project is now officially under way!

Listed below are the materials used to build the airplane. Some materials were purchased with Chris Owens so the quantity shown is HALF of what was actually ordered. That means in some cases you may not be able to order in the quantities shown due to the minimums.

Tools are on the tools page.

Airplane Materials

  • Aluminum:
  • Rivets (1/8 lb): MS20470AD3-3.5 = 2
  • Rivets (1/8 lb): MS20470AD4-6 = 0.5
  • Rivets (1/8 lb): MS20470AD4-7.5 = 5.5
  • Rivets (1/8 lb): MS20470AD4-8.5 = 1
  • Rivets (1/8 lb): MS20470AD4-9 = 0.5
  • Rivets (1/8 lb): MS20470AD4-10 = 2
  • Rivets (1/8 lb): MS20470AD4-12 = 0.5
  • Rivets (1/8 lb): MS20470AD4-13 = 0.5
  • Rivets (1/8 lb): MS20470AD5-9 = 3.5
  • Rivets (1/8 lb): MS20470AD5-10 = 0.5
  • Rivets (1/8 lb): MS20470AD5-12 = 2.5
  • Rivets (1/8 lb): MS20470AD5-14 = 7




Misc. Materials (for jigs etc)

  • 4x8 MDF 3/4" - 1
  • Elmers Spray Glue - 1
  • 1.5" long 3/16" machine screws with nuts & washers - 6
  • 3" long 3/16" machine screws with nuts and washers - 12

ExperCraft is supported by these quality vendors: